If you are looking for good-stuffed material to learn AWS VPC concepts in-depth, take away all your worries. You have landed on the right blog. This tutorial will help you to know more about AWS VPC. Know that AWS VPC is the virtual networking environment where you can launch the AWS resources. In this tutorial, you can learn default and non-default VPCs, subnets, DHCP options sets, and more. Not only limited with this, but you can also learn a lot along the road.
AWS VPC stands for Amazon Virtual Private Cloud. AWS VPC enables you to launch AWS resources in your virtual network and take complete control over your virtual networking environment. Know that this network will function as the actual network in your own data center. With AWS VPC, you can create subnets, add gateways, add subnets, and associate security groups. Besides, AWS VPC supports both IPV4 and IPv6 addressing protocols.
In this tutorial, you will have insightful content on AWS VPC in terms of AWS VPC peering, the stages of implementing AWS VPC, DHCP options sets, and much more.
AWS Virtual Private Cloud - Table Of content
You know that AWS VPC is much-needed to launch AWS resources such as EC2 instances in the AWS Cloud and protect them safely.
Are you still wondering why AWS VPC allows users to replace their physical network with this virtual one? Then you need to know the following pointers, which will help you in this regard.
Looking forward to becoming a master in "Cloud Computing Courses"? Check out the "AWS Training" and get certified today. |
Availability Zones: In an AWS VPC, there can be up to four availability zones, usually providing high availability and disaster recovery. The availability zones are distributed over the AWS region, providing the best insulation and stability. So, when there is a disaster, they protect the AWS resources safely.
Subnets: They are used to fulfill the routing requirement of AWS resources. Here, pubic subnets are used for public-facing resources, and private subnets are used for private-facing resources.
Security Layer: security groups effectively control the inbound and outbound traffic at the subnet level. In addition, Network Access Control Layer lists (ACL) act as the firewall and the additional layer of security.
Routing Tables: AWS VPC allows configuring the individual routing tables for every private subnet, which in turn supports controlling traffic in and out of subnets. On the contrary, public subnets use a single routing table because all the public subnets use a shared internet gateway to communicate with the internet.
NAT Gateways: AWS VPC has highly available NAT gateways that simplify AWS resources' availability, deployment, and maintenance.
Spare Subnet Capacity: AWS VPC is provided with additional subnets that will be used during scaling.
AWS VPC is provided with fantastic features to enhance the security of AWS resources and achieve effective monitoring.
Let’s explore them one by one.
Flow logs: They are usually delivered to Amazon S3 and Amazon Cloud Watch in AWS VPC. Monitoring the flow logs will provide good operational visibility over AWS VPC applications and resources. Not just that, Flow logs allow you to analyze network dependencies and traffic patterns among the AWS VPC resources. Also, you can detect anomalies in the activities of applications and other resources by which you can prevent data leakages. Moreover, you can effectively troubleshoot network connectivity and configuration issues.
With the support of flow logs, you can identify the activities in TCP connections and packet-level traffic flow through NAT gateways. Here, the NAT gateway is nothing but an intermediate layer. Besides, flow logs help to meet the compliance requirements of AWS VPC.
IP Address Manager (IPAM): IPAM is the tool used in AWS VPC to manage the planning, tracking, and monitoring of IP addresses for the workloads. Also, it helps track the usage of IP addresses across many accounts and VPCs, which in turn helps monitor virtual networks closely. What’s more! IPAM automates assigning IP addresses to instances.
IP Addressing: Know that you can assign public IP addresses to the instances of VPC. In this regard, AWS VPC allows using the IP addresses such as elastic IPv4 addresses, Amazon-provided public IPv4 addresses, and Amazon-provided IPv6 CIDRs.
Ingress Routing: This routing technique helps route all the incoming and outgoing traffic from an internal gateway to a specific Amazon EC2 elastic network interface. Not only internal gateway, but ingress routing supports virtual gateway too.
Network Access Analyzer: This is the tool used in AWS VPC to make sure whether the virtual network meets the security and compliance requirements or not. And this analyzer detects the accesses in the network that don’t meet the requirements. Simply put, a network access analyzer helps to improve the security and compliance of AWS VPC significantly.
Network Access Control List (ACL): ACL acts as a firewall and controls the traffic in and out of subnets. Also, it acts as an optional security layer, which supports secure networks in AWS VPC. One important thing to note here is that we can set up ACL with rules as it is done in security groups.
Reachability Analyser: Essentially, it is a static configuration analysis tool. It helps to analyze network reachability between two resources in AWS VPC. With the analysis reports, you can make an effective debugging process. When two resources are reachable, the reachability analyzer produces complete hop-by-hop details. If not, it identifies the components that restrict the reachability, which will support debugging.
Security Groups: They act as the firewalls for the EC2 instances connected with them. With security groups, you can control inbound and outbound traffic at the instance level. An instance can be connected with one or more security groups. Or else it will be connected with the default security group of VPC.
Traffic Mirroring: In this process, the network traffic is copied from an elastic interface of Amazon EC2 instances. Then, it is sent to security and monitoring applications so that deep packet inspection can be carried out. As a result, you can detect anomalies in the network and security, and gather operational insights about the AWS VPC. With this feature, you can efficiently implement compliance and security controls and troubleshoot issues.
AWS VPC is a network connection that can be made between two VPCs of different AWS regions or two VPCs of different AWS accounts. Creating a relationship between two VPCs of different regions is known as inter-region VPC peering. The purpose of making VPC peering is to enable a VPC to access AWS resources in another VPC. Therefore, AWS resources such as EC2 instances, Lambda functions, and Amazon RDS databases that run across different AWS regions can easily communicate with others.
VPC peering connections can be made through IP addresses without gateways, separate network devices, and VPN connections. Because of VPC peering, there won't be any bottleneck issues and failures in inter-region traffic. In short, VPC peering acts is a cost-effective tool to share AWS resources between AWS regions.
Want to know more about AWS check out: A Complete Tutorial for AWS |
With Default VPCs, you can quickly launch public instances and modify components based on your needs. Each availability zone in a default VPC will have a public subnet. Also, default VPCs will have the internet gateway and settings to enable DNS resolution. In addition to launching public instances, Default VPCs also provide other services such as Elastic Load Balancing, Amazon EMR, Amazon RDS, and so on.
Non-default allows creating your own VPC and configuring it the way you need. Also, you can create subnets in non-default VPCs and add more subnets. These subnets are called non-default subnets.
Would you like to ace AWS VPC job interviews? Top AWS VPC Interview Questions from MindMajix are exclusively for you! |
Before diving into the concept of DHCP options sets, you need to know about DHCP and its role in AWS VPC. Know that DHCP refers to Dynamic Host Configuration Protocol.
With DHCP protocol, AWS VPC provides the following advantages.
DHCP options sets are the group of network configurations used by EC2 instances in AWS VPC. Also, they support EC2 instances to communicate with each other. You can disassociate all option sets from the AWS VPC if needed.
Know that AWS VPC supports two types of DHCP option sets. They are given as follows:
Default DHCP option set:
In this type, all the VPCs in an AWS region will use the same default options sets. Following are the network configurations that you can get through the default DHCP option set.
Domain Name: It provides hostnames using the domain name system
Domain Name Servers: Network interfaces use domain name servers to achieve domain name resolution. Generally, all the instances in a VPC will interact with the Amazon DNS Server, DHCP server, and VPC Router. Especially, the instances can interact with DHCP servers at any time. As a result, they can get their IP address lease and additional network configurations.
Custom DHCP option set:
You can customise the DHCP option sets based on your needs. You can achieve the following configuration by creating your own DHCP option sets.
Domain Name: It provides hostnames using the domain name system
Domain Name Servers: Network interfaces use domain name servers to achieve domain name resolution.
NTP Servers: These servers generally use Network Time Protocol for devices to synchronise their clocks over the internet. In AWS VPC, NTP servers manage the time of instances.
NetBIOS Name Servers: They maintain a list of mappings between NetBIOS computer names and network addresses of a VPC. In other terms, VPCs use NetBIOS for their naming service. It is applicable for the EC2 instances running on a Windows Operating system.
NetBIOS Node type: It provides NetBIOS names to IP addresses for the instances running on a Windows operating system.
Subnets in a VPC consist of AWS resources like EC2 instances. And they can be connected to the datacenters, internet, and other VPCs. Know that each subnet will have a separate IP address. Managing traffic in and out of subnets is accomplished by using route tables. In general, every subnet is placed inside an availability zone. Because of this, subnets don’t overlap between zones. This setup provides good protection over the AWS resources inside an availability zone. Therefore, if there is a failure in any of the availability zones in an AWS region, it won’t affect the subnets in the other zones. Moreover, you can add subnets in the local zones based on your needs. Here, the local zone is nothing but the AWS deployment infrastructure where you can place devices such as compute, database, storage, and others.
There are three types of subnets used in AWS VPC. They are given as follows:
Public Subnet: You can use public subnets to connect AWS resources over the internet. The subnet traffic is usually routed to the internet through an internet gateway or an egress-only internet gateway.
Private Subnet: In a private subset, subnet traffic cannot reach the internet through the internet gateway but with a NAT device.
VPN-only Subnet: The subnet traffic is routed to a site-to-site connection through a virtual private gateway. Like the private subnet, the VPN-only subnet cannot reach the internet through the internal gateway.
While creating subnets, we need to specify IP addresses depending on the configuration of the VPC. Following are the three ways you can specify IP addresses to subnets.
Let’s look at the key features of the methods below:
IPv4 Only: This subnet will have an IPv4 CIDR block but won’t have the IPv6 CIDR block.
Dual-Stack: This subnet will have both IPv4 and IPv6 CIDR blocks. The AWS resources in these CIDR blocks will communicate over IPv4 and IPv6 addresses.
IPv6 Only: This subnet will have the IPv6 CIDR block but won’t have the IPv4 CIDR block.
Check out: AWS Configuration |
Implementation of AWS VPC is performed in three stages. You need to just follow the below:
AWS VPC allows creating AWS resources in subnets. Note that you can use default or non-fault subnets based on your needs.
This tutorial will help you start with AWS VPC using default subnets with simple instructions. Right! Get on board to experience the same.
Prerequisites:
https://portal.aws.amazon.com/billing/signup
Step 1: Understanding the Default VPC:
To begin with, you need to see the configuration of your default VPC with its default subnets, internet gateway, and main route table. Here, the main route table is used to route the internet gateway. The main route table allows all the resources in the default subnets to access the internet.
You can view the configuration of the default VPC by following the below instructions.
Step 2: Launching an instance in your VPC
In this step, you will get to know launching an instance in a default subnet in an AWS VPC. And the Amazon EC2 console offers default values for the instance configuration. This process helps to start with AWS VPC quickly. Once you select the AWS region, AWS will automatically select the default VPC for the region.
Now, execute the following instructions to launch an instance in your VPC.
Step 3: Connecting the EC2 instance in the public subnet with the home network
The EC2 instance you created in the public subnet can be accessed through the internet. With SSH or remote desktop, you could connect to the EC2 instance from the home network. Know that you can connect with both Linux and Windows instances from your home network.
Step 4: Cleaning up or terminating an instance.
You could terminate an instance once the job is done. Therefore, you can avoid any further charges for the instance. The instance will be displayed in the console for a while once you terminate the instance. Note that you shouldn't delete the default VPC.
By following the below instructions, you can terminate an instance:
Congrats! You have learned how to launch an instance from the AWS VPC. And you know how to connect an EC2 instance with the home network and terminate an instance.
Related Article: AWS EC2 Tutorial |
You can create, monitor, access, and manage the AWS VPCs through the following interfaces. Let’s take a look at them now:
AWS Management Console: It offers a web interface to access VPCs
AWS CLI: AWS VPCs and other AWS services are accessed using commands in this interface. It supports all platforms such as macOS, Linux, and Windows.
AWS SDKs: They provide language-specific APIs and manage the key tasks such as calculating signatures, error handling, and request entries.
Query APIs: They allow low-level API actions made using HTTPS requests. Moreover, it is the direct way to access QWS VPC.
So far, we have seen the features of AWS VPC from a technical point of view. Let’s know the business benefits of AWS VPC as listed below:
Let’s wrap off! You might have learned the basic concepts of AWS VPC, various features of AWS VPC, default and non-default VPCs, and many more. We hope that you might be familiar with getting started with AWS VPC and launching EC2 instances in an AWS VPC. With essential details, we have covered VPC subnets and how security is managed in AWS VPC. We are confident that this tutorial might have enriched your knowledge in AWS VPC a little better than before.
Stay updated with our newsletter, packed with Tutorials, Interview Questions, How-to's, Tips & Tricks, Latest Trends & Updates, and more ➤ Straight to your inbox!
Name | Dates | |
---|---|---|
AWS Training | Aug 05 to Aug 20 | |
AWS Training | Aug 08 to Aug 23 | |
AWS Training | Aug 12 to Aug 27 | |
AWS Training | Aug 15 to Aug 30 |
1 /15
Copyright © 2013 - 2023 MindMajix Technologies